IRS1808F4-BP-8P-DC is a rugged high-performance Gigabit Layer 2 fiber PoE switch specifically designed for mission-critical industrial scenarios. This device integrates 8 PoE+ ports, 4 duplex LC fiber ports, and their BYPASS automatic optical bypass ports, ensuring zero-interruption operation even during power failures, providing solid protection for networks with stringent reliability requirements.
Core Advantages
Industrial-grade rugged design: Operates stably in a wide temperature range of -40°C to 75°C, with excellent vibration resistance and electromagnetic interference immunity, adapting to extreme industrial environments.
Millisecond-level fault protection: Equipped with automatic optical bypass technology, achieving seamless link switching at the moment of power failure (millisecond level) to avoid network interruption.
High-power PoE+ power supply: Compliant with IEEE 802.3af/at standards, delivering up to 30W per port to directly power powered devices such as IP cameras and wireless APs.
Layer 2 network management functions: Supports VLAN, QoS, IGMP Snooping, and port security policies for traffic optimization and network control.
Hybrid fiber and copper access: Provides 4 1000BASE-X SFP optical ports (LC duplex) and 8 10/100/1000BASE-T electrical ports to accommodate diverse connection requirements across multiple scenarios.
Typical Applications
Power monitoring and substation automation systems
Rail transit and traffic signal monitoring networks
Industrial Internet of Things (IIoT) and factory automation control
Mission-critical communication systems (such as emergency command and oil/gas pipeline monitoring)
Remote IP video surveillance and security networks
IRS1808F4-BP-8P-DC builds a continuously stable data and power transmission bridge for critical infrastructure through industrial-grade reliability, zero-interruption bypass protection mechanisms, and intelligent network management.
Features
High-performance Layer 2 switching: Industrial-grade Layer 2 switch equipped with a 24Gbps high backplane bandwidth.
Multi-rate port configuration: Provides 8 PoE+ ports, 4 duplex LC fiber ports, and their automatic optical bypass ports, compatible with IEEE 802.3ab/z and other Ethernet standards.
High-power PoE supply: Supports IEEE 802.3af/at standards with 8 PoE ports, delivering up to 30W per port to drive wireless APs, IP phones, and video surveillance devices.
Layer 2 network management functions: Supports VLAN, QoS, IGMP Snooping, and port security policies for traffic optimization and network control.
Multiple management methods: Supports Web management/SNMP/SSH/Telnet/Console/CLI and other management interfaces to meet enterprise-level operation and maintenance requirements.
Attributes | ||||
Network Interfaces | 8x1Gbps PoE | |||
LED Indicators | Power, port speed, port link, POE | |||
Performance | ||||
Switching Capacity | 24 Gbps | |||
Forwarding Rate | 17.9 Mpps | |||
Forwarding Mode | Store and Forward | |||
Packet Buffer Memory | 12 Mbit | |||
RAM for CPU | 2 Gbit | |||
Flash Memory | 512 Mbit | |||
MAC Address Table | 16K | |||
Jumbo Frames | 16K | |||
Number of VLANs | 4K | |||
ACL Table | 1K | |||
L3 Interfaces | 64 | |||
Port Queues | 8 | |||
PoE Power Budget | 430W | |||
Physical Characteristics | ||||
Package Dimensions | 330 x 200 x 44 mm | |||
Operating Temperature | -40℃— 75℃ | |||
Storage Temperature | -40℃— 85℃ | |||
Operating Humidity | 5 to 95% Noncondensing | |||
Power Supply Method | 44~57VDC | |||
Maximum Power Consumption | 15W (without PoE load) | |||
PoE | ||||
PoE Ports | Ports 1-8 | |||
PoE Standard | IEEE802.3af, IEEE802.3at | |||
Maximum Power per PoE Port | 30W | |||
PoE Voltage | 44~57VDC (determined by input power) | |||
PoE Pin Assignment | V- (RJ45 Pin1,2), V+ (RJ45 Pin 3,6) | |||
PoE Management | Port-based PoE status view and control, PoE scheduling, PD activation automatic check | |||
Port Configuration | ||||
Enable and Disable | Supports control to enable and disable
| |||
Auto-Negotiation | Supports forcing port mode and speed
| |||
Flow Control | Supports IEEE802.3x full-duplex Supports half-duplex backpressure
| |||
Storm Control | Supports broadcast, multicast, and DLF packet rate limiting
| |||
Port Mirroring | Supports many-to-one mirroring
| |||
Port Rate Limiting | Supports port ingress and egress rate limiting
| |||
Link Aggregation
| Supports manual link aggregation Supports LACP Up to 8 aggregation groups, each containing up to 8 ports
| |||
Aggregation Policy
| Source MAC / Destination MAC / Source-Destination MAC Source IP / Destination IP / Source-Destination IP
| |||
Port Protection
| Each port can be configured as a protected port isolated from each other
| |||
MAC Configuration | ||||
MAC Address Table Management
| Supported | |||
Transmission Mode
| Supports IVL transmission mode
| |||
Static MAC Address
| Supported | |||
MAC Binding
| Supported | |||
MAC Address Filtering
| Supported | |||
MAC Quantity Limitation
| Supports limiting the number of MAC addresses learned per port
| |||
VLAN Configuration | ||||
802.1Q-based VLAN | Supported | |||
MAC-Based VLAN | Supported | |||
IP-Based VLAN | Supported | |||
Protocol-Based VLAN | Supported | |||
Voice VLAN | Supported | |||
Guest VLAN | Supported | |||
Private VLAN | Supported | |||
VLAN Mapping | Supports 1:1 mapping
| |||
Double VLAN Tagging
| Supports basic QinQ
| |||
Reliability Protocols
| ||||
Spanning Tree
| Supports STP/RSTP/MSTP | |||
BPDU Guard | Supported | |||
BPDU Filter | Supported | |||
Port Loop Detection | Supported | |||
EAPS Protocol | Supports RFC3619 | |||
ERPS Protocol | Supports G.8032/Y.1344 | |||
LLDP Protocol | Supports LLDP and LLDP-MED | |||
UDLD Protocol | Fully compatible with CISCO's UDLD protocol
| |||
Host Routing | ||||
Static ARP
| Supported | |||
Static Routing
| Supported | |||
Multicast
| ||||
Static Multicast MAC Address
| Supported | |||
IGMP Snooping
| Supported | |||
MVR | Supported | |||
GMRP | Supported | |||
Access Control List (ACL) | ||||
Standard IP-Based
| Supported | |||
Extended IP-Based
| Supported | |||
MAC IP-Based
| Supported | |||
MAC ARP-Based
| Supported | |||
Time-Based
| Supported | |||
Port Filtering
| Supported | |||
Quality of Service (QOS) | ||||
Scheduling Mode
| Supports WRR, SP, WFQ | |||
Port-Based Priority
| Supported | |||
802.1p-Based Priority
| Supported | |||
DSCP-Based Classification
| Supported | |||
ACL Data Flow-Based Priority
| Supported | |||
QoS Policy
| Supports mapping packets to corresponding output queues Supports modifying COS and DSCP tags of packets Supports data flow rate limiting Supports data flow statistics Supports data flow mirroring
| |||
Security
| ||||
Management Security
| Supports starting and stopping TELNET, WEB, and SNMP services Supports binding TELNET, WEB, and SNMP services with standard IP ACLs Supports controlling the number of TELNET users
| |||
CPU Protection
| Switch automatic security protection to prevent traffic attacks
| |||
IP-MAC Address Binding
| Supports static configuration of binding between IP, MAC, and port
| |||
AAA | Supports 802.1x protocol Supports RADIUS protocol Supports RADIUS server authentication, authorization, and accounting Supports MAC-based 802.1X authentication Supports 802.1x guest VLAN
| |||
DHCP Snooping
| Supports dynamic ARP binding to prevent ARP spoofing Supports dynamic IP, MAC, and port binding Supports fixed ports connecting to DHCP servers to prevent unauthorized DHCP servers
| |||
ARP Spoofing Prevention
| Supports manual configuration of ACL rules based on MAC ARP to prevent ARP spoofing Supports DHCP snooping function; when DHCP obtains an IP address, dynamically binds ARP and port for switching to prevent ARP spoofing
| |||
IPv6 | ||||
ICMPv6 | Supported | |||
IPv6 Neighbor Discovery | Supported | |||
MLD Snooping | Supported | |||
IPv6 Telnet | Supported | |||
Management Features | ||||
CLI Management | Supports serial port management Supports remote login management Supports SSH management
| |||
WEB Management | Supported | |||
SNMP Management | Supports SNMP protocol Supports SNMP traps Supports standard and private MIBs
| |||
User Management | Supports multi-user management
| |||
Display CPU Utilization
| Supported | |||
Display Memory Utilization
| Supported | |||
TACACS+ | Supports TACACS+ server remote username and password authentication Supports PAP and CHAP password encryption Supports TACACS+ server command authorization
| |||
Log Management
| Supported | |||
RMON | Supports RMON groups 1, 2, 3, 9
| |||
Cluster Management
| Supports neighbor discovery protocol Supports topology discovery protocol Supports manual and automatic joining of cluster groups Supports unified cluster management
| |||
OAM | Supports 802.3ah Supports 802.1ag | |||
DHCP Server
NEWS
Online MessagePRODUCTS
Product Recommendation
"}
IPE30 (30W) Industrial-Grade DIN-Rail Power SupplyIndustrial-grade single-port PoE injector (1G/2.5G/5G/10G adaptive) Switch product category: Products Port type: Electrical port Uplink port rate:
Downlink port rate: 100M, 1G, 2.5G, 10G Number of ports:
Management type: No management POE power supply: 802.3af,802.3at,802.3bt Management hierarchy:
IPE60 (60W) Industrial-Grade DIN-Rail Power SupplyIndustrial-grade single-port PoE injector Switch product category: Products Port type: Electrical port Uplink port rate:
Downlink port rate: 100M, 1G, 2.5G, 10G Number of ports:
Management type: No management POE power supply: 802.3af,802.3at,802.3bt Management hierarchy:
IPE90-bt (90W) Industrial-grade DIN-rail Power SupplyIndustrial-grade single-port PoE injector Switch product category: Products Port type: Electrical port Uplink port rate:
Downlink port rate: 100M, 1G, 2.5G, 10G Number of ports:
Management type: No management required POE power supply: 802.3af,802.3at,802.3bt Management hierarchy:
IDX201 Industrial-Grade DIN-Rail One-In-One-Out ExtenderIndustrial-grade single-port Gigabit PoE extender Switch product category: Products Port type: Electrical port Uplink port rate:
Downlink port rate: Gigabit Number of ports:
Management type: No management POE power supply: 802.3af,802.3at,802.3bt Management hierarchy:
phone
phone
phone phone
| ||||