HThe IDP270 series is a slim industrial-grade 270W DIN rail power supply, suitable for installation on TS-35 or TS-35/15 rails. The unit width is 60.5mm. The entire series is designed for a full voltage range AC input of 90Vac to 264Vac and complies with the EN61000-3-2 standard;
The IDP270 features a full aluminum alloy housing design, improving the overall heat dissipation effect, with efficiency as high as 92% or more. Under air circulation conditions, the entire series can operate in ambient temperatures from -20℃ to +70℃.Input Characteristics | |||||
Item | Specification Requirements | Remarks | |||
Input Voltage Range | 90-264Vac |
| |||
Input Frequency Range | 47Hz~63Hz |
| |||
Input Current | <7.0A/110Vac <3.5A/220Vac |
| |||
Inrush Current | 40A/115Vac 35A/220Vac | Cold state condition | |||
Efficiency | ≥93% | 230Vac full load | |||
Surge | 6KVA |
| |||
Power Factor (Active PFC) | 0.99/100Vac | Full load | |||
Output Characteristics | |||||
Model | IPD480-24 | IPD480-48 |
| ||
Output Voltage | DC24V | DC48V |
| ||
Output Current Range | 0~20A | 0~10A |
| ||
Voltage Accuracy | ± 1.0% | ± 1.0% |
| ||
Voltage Adjustment Range | 22~27.5V | 44~54V |
| ||
Output Power | 480W | 480W |
| ||
Line Regulation | ± 1.0% | ± 1.0% |
| ||
Load Regulation | ± 2% | ± 2% |
| ||
Ripple and Noise | <300mV | <200mV |
| ||
Efficiency | ≥91% typ. | ≥93% typ. |
| ||
Minimum Load for Testing | 10% of full load power | 10% of full load power |
| ||
Test Conditions | 20MHz bandwidth, test with a 10uF electrolytic capacitor and a 0.1uF polyester capacitor connected in parallel at the load end | ||||
Safety Requirements | |||||
Dielectric Strength and Insulation Resistance |
| ||||
Item | Specification Requirements | ||||
| Dielectric Strength* | Insulation Resistance** | |||
Input-----Output | 3.00KVac 5ma | ≥100MΩ | |||
Input-----Ground | 2.0KVac 5ma | ≥100MΩ | |||
Output-----Ground | 0.5KVac 5ma | ≥100MΩ | |||
Remarks | *Indicates withstand voltage level (V); allowable maximum leakage current (mA). **Test conditions: test voltage is 500VDC, 90%RH. | ||||
Leakage Current |
| ||||
Item | Specification Requirements | ||||
264Vac | <3.5Ma | ||||
Product Model | |
HP-IDP480-24V | 480W DIN-rail industrial power supply, 24V, 20A output |
HP-IDP480-48V | 480W DIN-rail industrial power supply, 48V, 10A output |
Industrial-grade single-port PoE injector (1G/2.5G/5G/10G adaptive)
Switch product category:
Products
Port type:
Electrical port
Uplink port rate:
Downlink port rate:
100M, 1G, 2.5G, 10G
Number of ports:
Management type:
No management
POE power supply:
802.3af,802.3at,802.3bt
Management hierarchy:
Industrial-grade single-port PoE injector
Switch product category:
Products
Port type:
Electrical port
Uplink port rate:
Downlink port rate:
100M, 1G, 2.5G, 10G
Number of ports:
Management type:
No management
POE power supply:
802.3af,802.3at,802.3bt
Management hierarchy:
Industrial-grade single-port PoE injector
Switch product category:
Products
Port type:
Electrical port
Uplink port rate:
Downlink port rate:
100M, 1G, 2.5G, 10G
Number of ports:
Management type:
No management required
POE power supply:
802.3af,802.3at,802.3bt
Management hierarchy:
Industrial-grade single-port Gigabit PoE extender
Switch product category:
Products
Port type:
Electrical port
Uplink port rate:
Downlink port rate:
Gigabit
Number of ports:
Management type:
No management
POE power supply:
802.3af,802.3at,802.3bt
Management hierarchy:
phone
0755-23706700
phone
sales@hnpoe.com
phone
201-202, Building 6, Zhonggang Plaza, Convention and Exhibition Bay, Fuhai Townt, Bao'an District, Shenzhen
phone